Navis 100 Installation Guide 1
Overview
This guide provides installation instructions for the Navis 100
luminaire. Navis 100 luminaires are available for standard or
emergency installations. They are intended for use with the F-Drive
series of drivers by ETC or other Class 2 or Low Voltage Limited
Energy (LVLE) power supplies (48 VDC maximum). Consult the
specifications and installation manual for your driver to ensure
compatibility.
Document Conventions
This document uses the following conventions to draw your attention to
important information.
Note:
Notes are helpful hints and information that is
supplemental to the main text.
CAUTION:
A Caution statement indicates situations where
there may be undefined or unwanted consequences of an
action, potential for data loss or an equipment problem.
WARNING: A Warning statement indicates situations where
damage may occur, people may be harmed, or there are
serious or dangerous consequences of an action
WARNING: RISK OF ELECTRIC SHOCK! This warning
statement indicates situations where there is a risk of electric
shock.
All ETC documents are available for free download from our website:
etcconnect.com.
Please email comments about this manual to:
TechComm@etcconnect.com.
To Next Page
Loading...