ETC ColorSource Spot - Error Codes; RDM Values

ETC Installation Manual
ColorSource Spot
ColorSource Spot Page 9 of 12 Electronic Theatre Controls, Inc.
Error codes
There are three error codes that may be shown on the user interface.
• : Screen toggles between and to indicate a problem
with the color calibration. The fixture will need to be returned to the ETC
factory; contact your local dealer to set up a repair.
•
: Screen toggles between and   to indicate that the fixture
has gone into over-temperature protection mode to avoid damaging
the fixture. Once the fixture has self-cooled, the error will automatically
clear.
•
: Screen toggles between and to indicate that the
upgraded fixtures have a software issue. Reload software to clear the
error. If the error persists, contact ETC.
RDM values
Parameter Value Description
Manufacturer ID 0x6574 Electronic Theatre Controls
Model ID
0x0205 ETC ColorSource Spot
0x0206 ETC ColorSource Spot Deep Blue
Personality ID
15 Channel
2Direct
31 Channel
4RGB