Ethicon G11 - Page 30

Generator G11 26
Generator G11 Operator’s Manual
HARMONIC Screens
Screen
Description
(Number of Uses) Remaining: Replace hand piece after (blank) uses�
Activate instrument for 2 seconds to run test� If using shears, open jaws during test�
(Note: Press ‘Settings’ for Settings Menu�)
Activate instrument for 2 seconds to run test� If using shears, open jaws during test�
(Note: Press ‘Settings’ for Settings Menu)�
Testing
(Note: Running system test�)
Foot Activation Off
(Note: Reactivate with handswitch, or adjust settings� Press ‘Settings’ for Settings Menu�)
Hand Activation Off
(Note: Reactivate with footswitch, or adjust settings� Press ‘Settings’ for Settings Menu�)