EN 7
4. Water reservoir LED: the LED flashes when the water reservoir
needs to be emptied.
5. Child lock LED: the LED is illuminated when the child lock is
switched on.
6. '- - -' means that the drying program is set to standby. Press any
button or open the door to re-activate the tumble dryer.
EDM106B
12345
1. Anti-crease button
2. Start/Pause button
3. Temperature button
4. Program button
5. On/Off button
Note: The control panel may be changed without prior written
notification. Visit the web site www.etna.nl or call the service line for
details.
DESCRIPTION OF THE APPLIANCE
To Next Page
Loading...