EN 21
Child lock
You can set up this function to prevent it being possible to operate
the buttons (e.g. children) when the dryer is running. All buttons are
disabled.
Switching on/off the child lock
• Press the temperature button and the program button at the same
time for 3 seconds while the program is running.
You will hear a beep and the LED above the key lights up; all
buttons are locked.
• Press the temperature button and the program button again at the
same time for 3 seconds .
A beep sounds and the LED goes out; the child lock is unlocked.
▷ The child lock function automatically unlocks after the drying
program has completed in full.
OPERATING THE EDM106B
To Next Page