EN 6
Control panel
EDM207L
0
1
87 6
23 4 5
1. Bulb/Start in... button
2. Anti-crease button
3. Low temperature button
4. Program selector dial
5. Start/Pause button
6. LED display
7. + button to manually adjust the drying time (20-40 min.)
8. - button to manually adjust the drying time (20-40 min.)
EDM207L LED display
1
2
345
1. REMAIN: the time on the display is the time remaining for the
program to finish its cycle.
2. DELAY: the time on the display is the delayed start time.
3. Filter LED: The LED flashes when
the fluff lint filter needs to be
cleaned.
DESCRIPTION OF THE APPLIANCE
To Next Page
Loading...