EasyManua.ls Logo

ETNA EDM106B - Safety; Warnings to Prevent Fire, Electric Shock and Other Accidents

ETNA EDM106B
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 8
Note the following symbols on the care label before you dry any
laundry:
Not suitable for tumble
drying
Dry flat
Suitable for tumble
drying
Drip dry
Line dry Dry in shade
Warnings to prevent fire, electric shock and other accidents
The tumble dryer must be connected to an earthed plug socket.
When you use the heating function, the tumble dryer has
a maximum charge of 10 A. Make sure the circuit(s) cannot be
overloaded and that it has a 16 A fuse.
The electrical installation must be performed by a qualified
person, in accordance with the manufacturer's instructions (see
the 'Installation' chapter starting on page 29) and local safety
regulations.
If the plug (mains lead) is damaged, it must be replaced by the
manufacturer or an authorised dealer.
Never pull the plug out of the socket by the cord.
Never pull the plug out of the socket with wet hands.
Do not make any alterations to the mains lead and/or plug.
SAFETY

Table of Contents