EN 17
Child lock
You can set up this function to prevent it being possible to operate the
buttons (e.g. children) when the dryer is running. All buttons are now
disabled, except for the program selector dial.
Switching on/off the child lock
• Press the 'Bulb/Start in...' and 'Anti-crease' button at the same time
for 3 seconds while the program is running.
You will hear a beep and the child lock icon lights up; all buttons are
locked.
• Once again press the 'Bulb/Start in...' and 'Anti-crease' button at
the same time for 3 seconds.
A beep sounds and the child lock is unlocked.
▷ The child lock function automatically unlocks after the drying
program has completed in full.
Delayed start time
You can set a time by pressing the 'Start in...' button, after selecting
the desired program. The tumble dryer will only start the program after
the set time. The program can be delayed by 1 – 24 hours. Every time
you press the button the delay is further extended by one hour. You
can also keep the button depressed. When the delayed start time is
selected, the display only shows the delayed start time and the 'Delay'
icon is illuminated.
• The tumble dryer is then turned on as soon as you press the Start/
Pause button. The program starts automatically when the delayed
time has elapsed.
• If you press the Start/Pause button again, the delayed start time will
be paused.
• If you want to cancel the delayed start time, then turn the program
selector dial to '0 'and then choose another program.
Setting a drying time yourself
This feature allows you to manually adjust the drying time from 20 to
40 minutes using the '+' and '-' buttons. This feature is specifically
intended for a few small items of clothing such as a facecloth or a pair
of socks. It works in the same kind of way as a timer and only when
combined with 'Hot air' or 'Cold air'.
OPERATING THE EDM207L
To Next Page
Loading...