EUCHNER CES-A-.5 - Connection Example

Operating Instructions
Non-Contact Safety Switch CES-A-.5
14
(translation of the original operating instructions) 2096580-16-11/22
9.6. Connection example
Important!
Ì To achieve category 4 according to EN ISO 13849-1, it is necessary to monitor the downstream
contactors (not shown here).
Ì The example shows only an excerpt that is relevant for the connection of the CES system. The
example illustrated here does not show complete system planning. The user is responsible for safe
integration into the overall system.
+24V DC
-F1
GND
Power Supply
Safety - PLC with static /
dynamic signals
O1 Pulsed output
O2 Pulsed output
I1 Input
I2 Input
A1
+LA
LA
+LB
LB
-LAB
0V
+UB
OUT
Read head
6
3
8
4
EUCHNER
7
1
GND
+24V DC
-F2
2
5
Fig. 2: Connection example CES-A-.5