EN 09
D E
F
Keep RoboVac away from wet areas during cleaning.
RoboVac may climb on top of objects less than 0.63 in / 16 mm in
height. Remove these objects if possible.
Anti-drop sensors will prevent RoboVac from tumbling down stairs
and steep drops in most cases. Sensors are less effective if dirty or
used on carpeted, reflective, or dark-colored floors. Place physical
barriers to block off areas where RoboVac may fall.
Using Your RoboVac
Important Tips Before Use
A B
C
Remove power cords and small objects from the floor that may
entangle RoboVac.
Fold tasseled edges of rugs underneath to prevent tangling RoboVac.
Avoid cleaning dark-colored high-pile rugs or rugs thicker than 1.02
in / 26 mm as they may cause RoboVac to malfunction.
It is strongly recommended to place physical barriers in front of
fireplaces and certain areas (i.e. air vents) that may cause damage to
RoboVac if entered.
To Next Page
Loading...
