Eumig MARK-S SUPER 8 - Taking out a Partly Run Film

Taking out a partly run film
1.
Pull
out
pressure
plate.
2.
Open
catches
of
feed-
and
take-up
sprockets.
(Main
switch
set
to
“O".
3. Remove film from its channel.
4.
Push
back
pressure
plate.
F
The
film
can
now
be
rewound
as
described
on
the
previous
page.
;
Do
not
remove
or
replace
the
sound-head
lid
when
there
is
a
film
in
the
projector.