Eumig MARK-S SUPER 8 - Head Set Outlet and Line Outlet

Head set outlet and line outlet C4]
The head set outlet (line outlet) offers the following possibilities:
1. Direct monitoring of recording level control (see page 18) or of automatic
mixing (see page 19) through a high-resistance head set.
2. Direct recording level control when using a mixing unit. In both cases the
head set plug must be pulled out during replay, as failure to do this would
cause a reduction in the frequency range at the high end of the scale.
3. The possible connection of hi-fi equipment for re-play calls for the use of a
jack plug with diameter 3.5 mm. or 3.6 mm. The EUMIG connection cable for
line outlet, type 790 U 109, is available for this purpose.
21