Eumig MARK-S SUPER 8 - Page 22

Connecting an external speaker
On the back of the EUMIG MARK-S SUPER 8 you will find the external loud-
speaker socket (data: 4-8 Ohm, 2—6 Watt). The EUMIG external speaker, type
790 U 107, is available from your dealer.
For the connection of other types of speaker, your EUMIG MARK-S SUPER 8 is
provided with a special plug.
Insert the external speaker plug into its socket fed, with the mark uppermost.
This cuts out the internal speaker, so that you will hear only the external
speaker, which is best placed near the projection screen.
When the plug is inserted with mark down, faq both speakers will be heard
simultaneously.