8. Connect and tighten
tether strap.
Connect the tether hook
to the anchor behind the
vehicle seat, as shown.
Pull the strap and tighten
the tether securely.
IMPORTANT: If your tether strap is too short to reach from
your child restraint to your vehicle tether anchor, you will
need a Tether Extender. Please call ParentLink.
7.
Ensure child
restraint is secure.
Hold the child restraint
near the vehicle belt
path, as shown, and
try to move it in all
directions.
Vehicle Belt
Path
48
Forward-facing Installation with Seat Belt
IMPORTANT: To properly secure this child restraint, it
MUST NOT move more than 25 mm (1 inch) from side-to-
side or from front-to-back at the vehicle belt path. If you
cannot tightly secure the child restraint, try again or move
it to another location.
To Next Page
Loading...
