Evenflo Tribute - Removing the Tether Strap; Removing the Lower Anchor Connectors

40 41
General
Information
Removing the Tether Strap
1
3
• To avoid a strangulation hazard, you MUST tightly
roll or fold excess tether strap and secure with the
strap/rubber band.
• Attach the tether hook to the storage clip when not
in use. This will keep an unused tether from hitting
someone during a crash.
WARNING
2
When the tether strap
is not in use you MUST
attach the hook
C
to
the back of the child
restraint, and tightly roll
and secure the strap with
the strap/rubber band.
A loose tether strap and
hook may injure your
child.
C
Press the tab
B
and
twist, then remove
the hook
C
from the
anchor
D
.
B
D
C
The tether strap that comes with your child
restraint will be one of the two types below.
A
B
Tilt and slide the
adjuster
A
to loosen.
Press the adjuster release
button
B
to loosen
tether strap.
3
When the Lower anchor
connector assembly is
not in use you MUST
attach the hooks
B
to
the back of the child
restraint. A loose Lower
anchor connector
assembly strap and hook
may injure your child.
1
B
Removing the Lower Anchor
Connectors
A
B
Tilt and slide the
adjuster
A
to loosen.
Press the adjuster release
button
B
to loosen.
The Lower Anchor Connector that comes with
your child restraint will be one of the two types
below.
2
To remove the hook
B
, press the tab
C
and twist,
then remove from anchor
D
.
B
D
C