Everbilt ZE00802A Use And Care Guide

Everbilt ZE00802A

10 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

THANK YOU

We appreciate the trust and confidence you have placed in Everbilt through the purchase of this non-submersible sump pump. We strive to

continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Everbilt!

SKU # 1001093976

Model # ZE00802A

USE AND CARE GUIDE

NON-SUBMERSIBLE WATER TRANSFER PUMP

Questions, problems, missing parts? Before returning to the store call

Everbilt Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday

1-844-241-5521

HOMEDEPOT.COM

Rev. 05/20/17

Table of Contents

Other manuals for Everbilt ZE00802A

Quick Start Guide23 pages

Questions and Answers:

R
robinsonreneeAug 3, 2025
Why is my Everbilt Water Pump running but the quantity of water is less than it should be?
- C
  Chloe SanchezAug 3, 2025
  If your Everbilt Water Pump is running but the water quantity is less than expected, consider these possibilities: * A restrictive discharge hose can limit water flow. Use a shorter, wider hose. * Air leaks in the suction hose can diminish performance. Ensure airtight connections. * Debris may be partially blocking the intake area. Clear any obstructions. * A discharge elevation that is too high can reduce the amount of water moved. The hose should not go up too high for improved performance.
J
Jason BlairAug 8, 2025
Why does the impeller wear out so quickly on my Everbilt Water Pump?
- A
  Allison WoodAug 8, 2025
  The impeller on your Everbilt Water Pump might wear out quickly due to: * Sand, dirt, or other grit in the water accelerating wear. Everbilt utility pumps are designed to pump clear water. * Pumping liquids other than water, as these may lack lubricating qualities. Everbilt utility pumps are designed to pump clear fresh water.
G
gespinozaAug 13, 2025
What to do if my Everbilt ZE00802A Water Pump motor runs but no water is discharged?
- W
  whitakererinAug 13, 2025
  If your Everbilt Water Pump motor is running but no water is coming out, there might be several reasons: * Ensure the pump is actually running and not just humming. * The discharge hose or pipe might be blocked or too restrictive. Check for blockages and ensure the hose/pipe isn't narrower than the pump's discharge or longer than the recommended maximum. * The discharge hose/pipe might be going up too high. Make sure it doesn't exceed the pump's maximum head capability. * The impeller or other internal parts could be worn, damaged, or clogged. Inspect these parts and clear any clogs. * If it's a non-submersible pump, it might need priming. Follow the priming directions in the manual.
T
Timothy CarpenterAug 18, 2025
What to do if my Everbilt Water Pump motor just hums and the pump is not running?
- K
  Kaitlyn NelsonAug 18, 2025
  If your Everbilt Water Pump motor is only humming and the pump isn't running, check for these issues: * The impeller might be stuck or jammed with debris. Inspect the impeller area and remove any obstructions, ensuring the impeller rotates freely. * The motor could be locked up. Check the cooling shroud and vents for foreign objects or shifting. Remove any objects and straighten the motor shroud. * If the above items are checked and the motor still hums, the motor may have failed. In this case, replace the pump.
P
pwallAug 23, 2025
What to do if my Everbilt ZE00802A Water Pump motor does not run or make any noise at all?
- J
  james15Aug 23, 2025
  If your Everbilt Water Pump motor isn't running or making any noise, here's what to check: * Ensure the pump is getting power. Check the outlet and your home's fuse or circuit breaker. * Make sure the pump is properly plugged in. * Check and replace the brushes if they are worn out. * If the pump has overheated from running dry, unplug it and wait at least 30 minutes before using it again. * If the liquid temperatures are below 30 degrees F or above 77 degrees F, do not operate pump in these temperatures. * If none of these steps work, the internal connection or motor may have failed, and the pump may need to be replaced.
T
Theodore BakerAug 28, 2025
What causes an impeller to be broken in Everbilt Water Pump?
- J
  jesse57Aug 28, 2025
  A broken impeller in your Everbilt Water Pump is often caused by debris being drawn into the pump. Take care to prevent debris from entering the pump, as it can damage the rubber impeller. If the impeller is broken, replace it.

Everbilt ZE00802A Specifications

General

Brand	Everbilt
Model	ZE00802A
Category	Water Pump
Language	English

Related product manuals

Preview: Everbilt HDS30

Preview: Everbilt EBAU33

Everbilt EBAU33

Preview: Everbilt UT03301

Everbilt UT03301

Preview: Everbilt LTS250A

Everbilt LTS250A

Preview: Everbilt UT08804

Everbilt UT08804

Preview: Everbilt PUP63-HD

Everbilt PUP63-HD

Preview: Everbilt EB-PUMP-T

Everbilt EB-PUMP-T

Everbilt EFLS10-HD

Preview: Everbilt ESE60W-HD

Everbilt ESE60W-HD

Everbilt SP05002VD

Preview: Everbilt EBAU25-PCP

Everbilt EBAU25-PCP

Everbilt PSSP07501VD