EDN228
57
【Event Management】You can set up the events such as Motion Detection or Tampering Detection
to automatically notify the users when an event occurs.
Event Name: Type an event name.
Event Trigger Type: Select an event for the to-be-specified-below reaction/s.
• Manual Trigger: Select this option if you want to manually trigger the alarm by clicking the
Trigger Event button on the Live View Page.
• Motion Detection: Select this option to trigger the to-be-specified-below reaction/s when
motion events occur. You have to pre-configure the Motion Settings for this function to
work.
• Schedule Recording: Select this option if you want the Schedule Recording periods
configured in the Schedule Settings to activate this event. In this scenario, a preconfigured
event reaction like a log entry will list the start and end times of each period. Actual
recording will only be triggered if the event is preconfigured to do so.
• Tampering Detection: Select this option if you want the camera’s tampering detection
sensor to trigger the to-be-specified-below reaction/s. You can set up the tamper duration
time in the Event Trigger Settings field below.
Enable This Event: Check the box to activate the event. For the Tampering Detection trigger
type, multiple events can be created on the Event List but only one event can be enabled. For
example, if you create three Tampering Detection trigger events, only one event under this
trigger type can be enabled. The option of Enable This Event for the rest of two Tampering
Detection events will be grayed out and display ‘’This Trigger Type has already been enabled.’’
To enable another event under the same type, uncheck to disable the event first and check the
desired event.
Enable Re-trigger minimum interval between triggers xx second: Check the box to set a
minimum time after the event is triggered before the event can be triggered again.
Enable Pre-trigger Buffer: Check the box if you want the Event reaction (as selected in the
“Notification Over” field below) to be the activation of the video recording function, and if you
want the recording to include the video feed from the time period (configurable in the
Schedule Settings field) just before the Event trigger occurred.
Enable Post-trigger Buffer: Check the box if you want the Event reaction (as selected in the
Notification Over field) to be the activation of the video recording function, and if you want the
recording to include the video feed from a time period (configurable in the Schedule Settings
field) just after the Event trigger occurred.
Notification Over: Select the desired notification types from the following items.
Log: Check the box if you want the camera to list the event’s details in its log if the event is
triggered.
Send Mail Notification: Check the box if you want the camera to send an email text notification
and one image file to the email address entered in the SMTP Settings field (see 7.3.3
Notification).
To Next Page
Loading...
