(8) TIME SYNCHRONIZE:
Select “ON”or “OFF” to enable or disable time synchronize which can let you have correct time
automatically when network is connected.
(9) TIME SERVER:
You can set the time server address where you locate if you connect to network and enable time
synchronize.
(10) TIME ZONE:
You can set the time zone where you locate if you connect to network and enable time
synchronize.
(11) TIME UPDATE BY:
Once you enable the TIME SYNCHRONIZE, you can select the synchronization frequency by:
(7) END TIME: To set the end time of daylight saving time.
To set the end time of daylight saving time: To set the end “FROM” time and “TO”time of
daylight saving time.
LAST
To set the end week of daylight saving time: Dial the jog to set the end week.
1 ST 2 ND 3 RD 4 TH
To set the end date of daylight saving time: Dial the jog to set the end date.
THUSUN
FRI
TUEMON WED SAT
To set the end month of daylight saving time: Dial the jog to set the end month.
FEB MARJAN APR MAY JUN
DECNOVOCTSEPAUGJUL
DAY MONTHWEEK
30
To Next Page
Loading...
