EverFocus EDR810M - Call

7. CALL
Press the CALL key and the CALL MENU will pop up as below.
In the SYSTEM SETTING MENU, we define :
(1) SEQ: Sequence display on the call monitor. Press SEQ to switch “ON” or “OFF” of the sequence
status.
(2) OSD: Channel name display on the call monitor. Press DISPLAY to switch “ON” or “OFF” of
the OSD status.
(3) CAMERA: The display camera in the call monitor.
(4) QUAD DISPLAY: Display quad in the call monitor.
Dial Jog to enable (“YES”) or disable (“NO”) QUAD DISPLAY on the call monitor.
(a) SEQ is OFF:
When QUAD DISPLAY is “NO”, press FULL + Channel key to assign a specific full screen
in the call monitor.
When QUAD DISPLAY is “YES” (enabled), press FULL + CH 1 or CH2 to display a quad
screen in the call monitor. Press FULL + CH 1 to display channel 1 to channel 4 in the call
monitor, and press FULL + CH 2 to display channel 5 to channel 8 in the call monitor.
66