(6) EMAIL/NETWORK:
YES: Send an email / Enable alarm network when an alarm occurs.
NO: Do not send an email / Disable alarm network when an alarm occurs.
The email address can be set in the NETWORK SETUP MENU.
(7) BUZZER: Motion buzzer.
ENABLE: To enable a motion buzzer.
DISABLE: To disable a motion buzzer.
(8) MAIN MON: Display on a main monitor when a motion occurs.
NO CHANGE: Nothing changes on the display in the main monitor when a motion occurs.
FULLSCREEN: A full screen pops up when a motion occurs.
(9) CALL MON: Display on a call monitor when a motion occurs.
NO CHANGE: Nothing changes on the display in the call monitor when a motion occurs.
SEQUENCE: Display in the sequence mode when a motion occurs.
ACTIVE CAMERA: Display the active camera in full screen mode to the call monitor.
(10) SUMMARY:
Dial Jog to change items in the SUMMERY table.
All motion’s statuses are shown in SUMMARY tables. These tables are for checking motion
overall statuses, but not for setting.
39
To Next Page
Loading...
