Need help?Do you have a question about the EverFocus EKB500 and is the answer not in the manual?
Details the two independent RS-485 ports and their pin assignments.
Explains the power connector and how to supply power to the keyboard.
Explains the principles and methods for installing the RS-485 bus wiring.
Details the connection procedure for EverFocus EPTZ series speed dome cameras.
Outlines the connection method for Samsung and related speed dome cameras.
Describes how to connect devices compatible with Pelco-D and Pelco-P protocols.
Explains how to connect EverFocus DVRs to the EKB 500 keyboard.
Explains how to define telemetry protocol type and transmission rate for RS-485 interfaces.
Covers the definition of connection settings for all controlled devices.
Details how to define telemetry cameras and assign them to DVR monitors.
Describes assigning monitors to DVR outputs and managing system access.
Explains how to define digital video recorders to be controlled by the keyboard.
Covers general keyboard and security settings.
Explains how to protect the setup menu access with a password.
Details how to activate an automatic keyboard lock after a period of inactivity.
Explains the process for calibrating the 3-axis joystick for accurate control.
Explains how to reset the keyboard to its factory default settings.
Details the process for loading new firmware onto the keyboard.
Covers the setup and operation of PTZ cameras.
To Next Page
General