EverFocus EPA6220 - Dome; Comm; Ir Display

EPA6220 / EPA6236
11
4.2 Dome
4.2.1 COMM
MAIN MENU
< SYSTEM >
< DOME >
< CAMERA >
< DISPLAY >
< LANGUAGE >
< TIMING TASK >
< ALARM >
< RESET >
EXIT
DOME
< COMM >
< IR DISPLAY >
< GUARD TOURS >
< A-B SCAN >
< PAN SCAN >
< PATTERN >
< PARK ACTION >
< PRIVACY ZONE >
< ADVANCED >
COMM
DEVICE ID
CHECK ID
TARGET ID
SOFT PROTOCOL
BAUD RATE
COMM RESET
SAVE
EXIT
160303
160298
003
AUTO
9600
DEVICE ID: The device ID is auto generated by the system.
CHECK ID: To change the TARGET ID, please input the CHECK ID exactly same as the DEVICE ID displays on
the screen.
TARGET ID: Target ID is available from 001 to 250, which can be used to distinguish several domes with
the same ID.
SOFT PROTOCOL: Select a protocol for the dome.
BAUD RATE: Select a baud rate for the dome. Options include 1200BPS, 2400BPS, 4800BPS and 9600BPS.
COMM RESET: Enter to restore the COMM settings to factory default and then automatically restart the
dome.
SAVE: Enter to save all the configurations. The dome will reboot.
EXIT: Exit the current menu.
4.2.2 IR DISPLAY
MAIN MENU
< SYSTEM >
< DOME >
< CAMERA >
< DISPLAY >
< LANGUAGE >
< TIMING TASK >
< ALARM >
< RESET >
EXIT
DOME
< COMM >
< IR DISPLAY >
< GUARD TOURS >
< A-B SCAN >
< PAN SCAN >
< PATTERN >
< PARK ACTION >
< PRIVACY ZONE >
< ADVANCED >
IR DISPLAY
WORKING MODE
TESTING TIME
OUTPUT POWER
ILLUMINATION ON
AMBIENT LIGHT
IR SWITCH ZOOM
EXIT
AUTO
08S
100
03
17
07
WORKING MODE: Select an IR working mode for Day/Night switch. Options include Auto, Off (color) and
On (black & white). If Auto is selected, the dome will automatically switch from day to night mode when
the illumination level is low; or automatically switch from night to day mode when the illumination level
is high.