EverFocus EPA6220 - A-B Scan; Pan Scan

EPA6220 / EPA6236
13
4.2.4 A-B SCAN
MAIN MENU
< SYSTEM >
< DOME >
< CAMERA >
< DISPLAY >
< LANGUAGE >
< TIMING TASK >
< ALARM >
< RESET >
EXIT
DOME
< COMM >
< IR DISPLAY >
< GUARD TOURS >
< A-B SCAN >
< PAN SCAN >
< PATTERN >
< PARK ACTION >
< PRIVACY ZONE >
< ADVANCED >
A-B SCAN
PRESET A
PRESET B
SCAN SPEED
DWELL TIME
RUNNING
DELETE
EXIT
03
06s
PRESET A: Set up A point from preset 0 to 64. To save the position, activate preset 1.
PRESET B: Set up B point from preset 0 to 64. To save the position, activate preset 1.
SCAN SPEED: A-B scan speed can be set up from 1 to 64.
DWELL TIME: Dwell time can be set up from 2s to 60s.
RUNNING: Enter to activate the A-B scan function.
DELETE: Enter to delete the setting of A-B scan. The preset points will display as 0.
EXIT: Exit the current menu.
4.2.5 PAN SCAN
MAIN MENU
< SYSTEM >
< DOME >
< CAMERA >
< DISPLAY >
< LANGUAGE >
< TIMING TASK >
< ALARM >
< RESET >
EXIT
DOME
< COMM >
< IR DISPLAY >
< GUARD TOURS >
< A-B SCAN >
< PAN SCAN >
< PATTERN >
< PARK ACTION >
< PRIVACY ZONE >
< ADVANCED >
PAN SCAN
PAN SCAN SPEED
INIT
RUNNING
EXIT
03
PAN SCAN SPEED: Set up the PAN scan speed from 1 to 64. PAN Scan supports 360°clockwise continuous
scan.
INIT: Enter to initialize the PAN Scan speed to default value.
RUNNING: Enter to activate the PAN scan function.
EXIT: Exit the current menu.