EverFocus EPA6220 - Guard Tour

EPA6220 / EPA6236
12
TESTING TIME: If Auto is selected from the IR working mode, you can set up a switch time (switch from
day to night or night to day) to activate the switch action.
OUTPUT POWER: Select an output power. Options include 40%, 60%, 80% and 100%.
ILLUMINATION ON: Illumination on is 1 to15 grade selectable and default is 3. If Auto IR working mode is
selected, when the Illumination On level is lower than the ambient light, the picture will change to color,
the IR illumination will turn off automatically. When the Illumination On level is higher than the ambient
light, the picture will change to black and white, the IR illumination will turn on automatically.
AMBIENT LIGHT: Ambient light is a system data. User cannot change it manually. The Ambient Light
changes according to the environment all the time. The data will refresh every time when user enter the
OSD.
IR SWITCH ZOOM: When zoom value reaches the demanded setting, the IR LEDs with auto switch from
near illumination to far illumination.
EXIT: Exit the current menu.
4.2.3 GUARD TOUR
MAIN MENU
< SYSTEM >
< DOME >
< CAMERA >
< DISPLAY >
< LANGUAGE >
< TIMING TASK >
< ALARM >
< RESET >
EXIT
DOME
< COMM >
< IR DISPLAY >
< GUARD TOURS >
< A-B SCAN >
< PAN SCAN >
< PATTERN >
< PARK ACTION >
< PRIVACY ZONE >
< ADVANCED >
GUARD TOURS
GUARD TOUR
SETTING
INIT
RUNNING
DELETE
EXIT
01
GUARD TOUR: Select a number to start setting the Tour function. Up to 8 tours can be set up.
SETTING: You can set-up up to 16 presets to each guard tour. Preset point is from 0-64 (0 is invalid). Dwell
time is from 1 to 60s. Speed value is from 1 to 64.
GUARD TOUR 01
ID
01
02
03
04
05
06
07
08
GUARD TOURS
GUARD TOUR
SETTING
INIT
RUNNING
DELETE
EXIT
01
POINT
017
018
019
020
021
022
023
024
TIME
06
06
06
06
06
06
06
06
SPEED
64
64
64
64
64
64
64
64
INIT: Enter to initialize the preset point, dwell time and speed to default value.
RUNNING: Enter to activate this tour function.
DELETE: Enter to delete the setting of this tour. The preset points will display as 0.
EXIT: Exit the current menu.