NO. DESCRIPTION QTY
18
CARRIAGE BOLTS
(M8 x 55mm)
1
19
CARRIAGE BOLTS
(M8 x 90mm)
1
23
FLAT WASHERS (M8)
2
24
SPRING WASHER (M)
2
25
FLATWASHERS (M10)
2
28
LOCKING KNOB
(FEMALE M8)
2
29
NYLON LOCKNUT (M10)
1
43
HEX BOLT (M10 x 55mm)
1
STEP 4
• Place an M8 x 55mm Carriage Bolt (18) in the UPPER hole
and secure in position using an M8 Flat Washer (23), an M8
Spring Washer (24) and an M8 Locking Knob (Female) (28).
Tighten securely to lock the frame in position.
• Connect the rear of the Main Frame (4) to the Cross Bar
(3) using an M10 x 55mm Hex Head Bolt (43), two M10 Flat
Washers (25) and an M10 Nylon Locknut (29) bolted from the
side.
• Place an M8 x 90mm Carriage Bolt (19) in the upper hole
and secure in position using an M8 Flat Washer (23), an M8
Spring Washer (24) and M8 Locking Knob (Female) (28).
Tighten securely to lock the Main Frame (4) in position.
ASSEMBLY STEPS
9
To Next Page
Loading...
