NO. DESCRIPTION QTY
17
CARRIAGE BOLT
(M8 x 50mm)
1
23
FLAT WASHER (M8)
1
25
FLATWASHER (M10)
2
26
NYLON LOCKNUT (M8)
1
29
NYLON LOCKNUT (M10)
1
43
HEX BOLT (M10 x 55mm)
1
NOTE :
Be sure seat hole of MAIN
FRAME (4) toward front.
ASSEMBLY STEPS
STEP 3
• Fit the Front Stabilizer (5) to the Leg Extension Upright
(6) and secure with an M8 x 50mm Carriage Bolt (17), an
M8 Flat Washer (23) and an M8 Nylon Locknut (26).
• Connect the assembled Leg Extension Upright (6) to the
front of the Main Frame (4) using an M10 x 55mm Hex
Head Bolt (43), two M10 Flat Washers (25) and an M10
Nylon Locknut (29) bolted from the side.
8
To Next Page
Loading...
