Evers BPT-L19 - Operational Modes and Function; Scope of Delivery

3.2 Function
● Feed the strap manually through the seal (1).
● Guide the strap start (5) around the packaged
goods and through the seal again, then bend
it over.
● Tensioning by feed wheel principle (4).
● Sealing by notching (2) the seal.
● Strap cut with knife (3).
● You can choose between three operating modes
(Section 4.2):
● Manual (standard/factory setting)
● Semi-automatic
● Fully automatic
● The tensioning force is adjustable (Section. 4.3).
● The tools can be operated with the strap widths 13, 16 and 19 mm (Section 7).
3.3 Scope of delivery
For strapping tool BPT-L19: ● Battery Li-Ion ProCORE 18 V / 4.0 Ah Part no 2187.025
● Battery charger GAL 1880 CV EU Part no 2188.020
or for USA version: ● Battery Li-Ion ProCORE 18 V / 4.0 Ah Part no 2187.026
● Battery charger (US) 1880 Part no 2188.021
or for Japan version: ● Battery charger GAL 1880 CV (JP) Part no 2188.022
or for Australia version: ● Battery charger GAL 1880 CV(AUS) Part no 2188.023
Tool kit consisting of: ● Screwdriver Torx T20 Part no 1821.901.010
4
1
3
2
5
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen Telefon +49 208 99475-0 Telefax +49 208 99475-31 evers@eversgmbh.de eversgmbh.de