Evers BPT-L19 - EC Declaration of Conformity

BPT-L19
STEEL STRAP
Strap width 13 mm (
1
/
2
″) 16 mm (
5
/
8
″) 19 mm (
3
/
4
″)
Normal quality:
Tensile strength up to approx. 850 N/mm
2
850 N/mm
2
850 N/mm
2
Strap thickness 0.40–0.63 mm 0.40–0.63 mm 0.40–0.63 mm
(.015″–.024“) (.015″–.024“) (.015″–.024“)
High strength quality:
Tensile strength up to approx. 1100 N/mm
2
1100 N/mm
2
1100 N/mm
2
Strap thickness 0.40–0.63 mm 0.40–0.63 mm 0.40–0.63 mm
(.015″–.024“) (.015″–.024“) (.015″–.024“)
SEALS 13 mm 16 mm 19 mm
8 EC Declaration of Conformity (copy)
(CE 2006/42/EC, Annex II 1.A.)
The manufacturer take sole responsibility for declaring that the machines to which this declaration
refers are in full conformity with the current requirements of the Council Directive of 17th May 2006
(2006/42/EC)″MachineDirective″anditsamendments.
Furthermore, electrical installations are in conformity with the requirements of the Council Directive of
26thFebruary2014(2014/30/EU)″EMCDirective″.
The following harmonised standards
were taken into account: EN 60745-1:2009 + A11:2010; EN 60745-2-18:2009;
EN ISO 12100:2010; EN ISO 13854:2019; EN 61000-6-1;
EN 61000-6-3
CBTestCerticate: NL-76385
Placeofcertication: DEKRACerticationB.V.
Meander 1051, NL-6825 MJ Arnhem, Netherlands
Type designations: BPT-L19
From machine no./ year of construction L/21111001 / 2021
CH-8953 Dietikon, 01.10.2021
R. Siegrist M. Binder
Managing Director Director-Head of Global R&D
Agent for the publication of technical documentation:
Signode Switzerland GmbH, Silbernstrasse 14, 8953 Dietikon 1, Switzerland
Manufacturer
Signode Switzerland GmbH
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen Telefon +49 208 99475-0 Telefax +49 208 99475-31 evers@eversgmbh.de eversgmbh.de