7 Technical data
BPT-L19
Weight 4.5 kg (9.9 lb) (incl. battery)
Dimensions Length: 390 mm width: 150 mm Height: 140 mm
(15.3″) (5.8″) (5.5″)
Strap tension 400–3000 N (90–675 lbf)
Tension speed 135 mm/s
Sealing Sealjoint with single notch
Sealeciency
depending on strap quality,
dimension and seals approx. 55% of strap tensile strength
Typical measured A-rated
emission sound pressure level*
– EN 60745-1/2:2009 L
pA
58 dB (A)
(Deviation 3,0 dB)
Average sound power level*
– EN 60745-1/2:2009 L
WA
69 dB (A)
(Deviation 3,0 dB)
Vibrations at handle*
– EN 60745-1/2:2009 a
h
< 2,5 m/s
2
(Deviation 1,5 m/s
2
)
Operating temperature for the
strapping tool (see separate oper-
ating instructions for battery and
charging device) –10 °C to +40 °C (14–104 °F)
Relative humidity Up to 90 %
CHARGER / BATTERY
Rated voltage charger 100 / 110 / 230 V
Charger type BOSCH GAL 1880 CV (US: BC 1880)
Charging time 30 min. = approx. 80%, 50 min. = approx. 100% capacity
Strappings with one battery charge Up to 500 depending on strap, strap tension and package
Battery Bosch Li-Ion ProCORE 18 V 4.0 Ah
* refer to Section 2.4, Vibration and noise exposure
Continued on the next page
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen Telefon +49 208 99475-0 Telefax +49 208 99475-31 evers@eversgmbh.de eversgmbh.de
To Next Page
Loading...
