eversense CGM - Turn the Smart Transmitter on and off

5
40
Eversense CGM User Guide
Turn the Smart Transmitter ON and OFF
The smart transmitter has a power button to turn the device on and o. The power button and two light emitting
diodes (LED) lights are also used to indicate the remaining battery power.
1. To turn the smart transmitter ON, press and hold
the power button for about five seconds.
• The smart transmitter will vibrate once.
• Release the power button and the LED will blink
once indicating the power is ON.
At any time, you can press the power button once to
see if the smart transmitter is ON. If the LED appears,
the smart transmitter is ON. If no LED appears, the
smart transmitter is OFF.
2. To turn the smart transmitter OFF, press and hold
the power button for about five seconds.
• The smart transmitter will vibrate once.
• Release the power button and an orange light
will blink once, indicating the power is OFF.
Power button
LED indicator
LBL-1602-01-001 Rev N_Eversense User Guide_mgdL_R1.indd 40LBL-1602-01-001 Rev N_Eversense User Guide_mgdL_R1.indd 40 2/26/20 12:58 PM2/26/20 12:58 PM