EVERUN ER2500 - Machine Identification

Telescopic boom Machine ER2500- THE OPERATOR’S
MANUAL
- 9 -
covered by warranty. Transport to/from the workshop,the inactivity of the machine
and any consequent damage, all transport, works and storage costs are excluded
from the warranty too.
2. The warranty will invalidate
-if accidents occur due to operator’s fault;
-if the damage was caused by insufficient maintenance;
-if the machine should suffer vibration or damage after works operated by the user
without the authorization of the manufacturer or following the fitting of non-
original parts;
-if operation do not follow the instructions in this manual;
-in exceptional events.
3. Damages caused by negligence or incorrectly use the machine are not covered by
warranty.
ATTENTION
4. Removal of the safety device will make the warranty invalidate, and non-liability of
the manufacturer.
5. The replaced parts do not have warranty.
6. The machine or parts of it, returned even under warranty, will be sent EXW.
7. Other exclusion of warranty
-tires;
-rims;
-brakes;
-chassis;
-parts of chassis more likely to be damaged;
-muffler;
-battery;
-buttons and joysticks;
-seat;
-steering wheel;
-gaskets of cylinder;
-all accessories.
2.3 MACHINE IDENTIFICATION