Multifunctional Machine ER2500- THE OPERATOR’S
MANUAL
In case of contact with eyes, wash with a lot of water and turn to the first aid.
In case of substitution of a battery, make sure the poles are correct. A wrong connection
could cause serious damages to the electric plants.
-When the electrical system is being repaired, disconnect the batteries with the
special key to interrupt the flow of electricity.
-Disconnect both battery and alternator, when welding on the machine is necessary.
4.7.2 FUSES
The electric circuit is protected by a series of fuses located at one side of the
instrument platform. For various protections, check the electric wiring.
4.8 LUBRICATION
4.8.1 GREASING
The points of greasing is illustrated in the below picture.
Picture 4.8.1 A
The greasing points showed in Picture 4.8.1 A (the telescopic boom and the front
chassis) should be weekly greasing.
To Next Page
Loading...
