Section 5
Hardee by EVH
Maintenance
LR50160 Long Reach Mower 15
Maintenance and Service Schedule
This section is dedicated to the maintenance of the
LR50160. As with any piece of equipment, the
performance and life span depends on the proper
operation and maintenance.
DANGER
Never attempt any checks, repairs or adjustments with
tractor engine running or the power take-off engaged.
Adjustment of rotating parts while the tractor engine is
running can result in serious personal injury or death if
the PTO accidentally engages.
First Stage Boom
Inject with heavy multi-purpose grease. There are five
grease fittings on the swing post.
First Stage Boom to Second Stage Boom
Inject with heavy multi-purpose grease. There is a
grease fitting at every hinge point.
Deck and Second Stage Boom
Inject with heavy multi-purpose grease.
Hydraulic Motor Housing Assembly
Locate fitting on motor housing. Inject with 90W gear
oil.
Greasing PTO Driveshaft to Pump
Remove PTO shaft from mower before greasing. Use
heavy multi-purpose grease at all grease fitting and on
shaft. Remember to grease the shield grease fittings
as well as the u-joints.
To Next Page
Loading...
Need help?
General