Section 5
Hardee by EVH
Maintenance
LR50160 Long Reach Mower 21
Routine Maintenance Checklist
Interval Item
Check
Lube
Change
Comments
Pump Drive Shaft •
Pivot Points •
Grease Fittings •
Hydraulic Fluid Level •
Blades • Change If Damaged
Blade Bolts (Blade To Blade Holder) •
Torque to Spec. on Blade Holder
Breakdown
Blade Holder Nut •
Torque to Spec. on LR50160 -
Parts Breakdown
Spindle Bolts (Spindle To Deck) •
Main Frame And Deck Bolts •
Daily Or 10
Hours
Rubber Shielding • Change If Damaged
Hydraulic Return Filter •
Change After 1st 50 Hours, Then
Every 500 Hours
Weekly Or 50
Hours
Hydraulic Fittings •
Tank Breather •
Monthly Or 150
Hours
Hydraulic Fluid Level •
Seasonal Or 500
Hours
In Tank And Return Hydraulic
Filters
•
To Next Page
Loading...
Need help?
General