EVISTR VOICE RECORDER
http://blog.evistr.com support-us@evistr.com
Page - 25 - of -28 -
For more failed connect to computer issue, please kindly contact us. We will reply to you as soon as
possible.
6) Can I delete recordings from computer
Yes, when the recorder was successfully connected to your computer, you should find it as an
removable drive, and all your recordings was saved in a folder names “RECORD” in the drive.
You can delete file or copy file into it, as you used with your ordinary USB Flash Drive.
7) When Connect to computer, the buttons not work
When connected to computer, it was at the connection mode, the voice recorder screen will show
the “CONNECTION ICON” .
All buttons will not work at this situation, if you press M and hold it, it will exit connection mode,
and will be failed to connect to your computer.
8) Cannot find my recordings in the recorder
This mainly because when you open the voice recorder, it reads the MUSIC folder, you could long
press STOP switch back to recordings folder
Or you could connect it to your computer to check whether there is recordings on your recorder
9) How to Open voice activated function
Go to main menu, find record setting, enter it , select Voice Activated Setting, turn on AVR mode,
and press PLAY confirm it.
Now press REC, you will see VOR on the screen, it means you have successfully set voice activated
recording function
10) How to Use the AVR Mode (Voice Activated Function)
When AVR mode is open, the recorder will enter voice activated recording mode.
It will only picks up loud enough decibels voice (any sounds).
So you can adjust the voice activated sensitivity in record setting, select the best AVR level as you
want, and get the best effect of voice activated recording.
For V508 voice recorder, the AVR level could be selected from 1 -6; The higher number means need
higher decibels voice to activated the recorder, and it need louder voice; At level 1, it is very
sensitivity, only a very low decibels or quiet speaking could be picked up.
To Next Page
Loading...
