EVISTR VOICE RECORDER
http://blog.evistr.com support-us@evistr.com
Page - 24 - of -28 -
CHAPTER FIVE
TROUBLE SHOOTING
1) No Voice Recordings
If there is no voice recordings, or you have deleted all recordings in your voice recorder, when you
turn on your voice recorder, you will see “ no voice recordings” or “no songs” on the screen. Don’t
worry, you could just go ahead to using the device
2) How to Close Record Light
Go to Record Settings -> LED_ON/OFF -> select OFF, so when recording, the record light will not light
up or flash
3) Disk Error
Due static shock, like over current charging, cut off its power when format device didn’t completed,
so it lost system firmware.
How to Rescue:
Keep its power button at OFF position, connect to windows computer, and format the recorder disk
again, things will be normal. For MAC user to go our site https://www.evistr.com to download
tutorials on how to format the device or directly contact our customer service
support-us@evistr.com for help.
4) How to connect to computer
Use the attached cable connect to your computer, or your android phone cable
If you failed connect it to your computer, you could contact us, support-us@evistr.com we will help
you solve it, or you could do some trouble shooting, according our next chapter said
Or you could go to the simple way, just change a new socket or new cable. Because this issue usually
happens like you failed connect your flash drive to your computer, they are the same issues.
5) Failed Connect to Computer
Before connecting the voice recorder to computer, you should shut off the recorder
And when connect to computer, you shouldn’t press any buttons of the voice recorder, it means you
shouldn’t do any operation of the voice recorder,
Otherwise, it will exit connection mode, and failed connect to computer. At this status, it will only
charge the voice recorder
To Next Page
Loading...
