DOUBLE INSULATED INSTRUCTIONS
Replacement Parts
• When servicing use only identical replacement parts.
Polarized Plugs
• To reduce the risk of electric shock, this equipment has a
polarized plug (one blade is wider than the other). This plug
will t in a polarized outlet only one way. If the plug does
not t fully in the outlet, reverse the plug. If it still does not
t, contact a qualied electrician to install the proper outlet.
Do not change the plug in any way
TRANSPORTATION/STORAGE
• For ease, convenience and safety, when transporting or
storing the machine the Cutting Head should be locked in
the ‘locked down’ position.
TO HOLD THE CUTTING HEAD DOWN:
• Lower the Cutting Head to its lowest position.
• Hook the requisite link of the Lock Down Chain over the
Lock Down Hook.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advise.
To Next Page
Loading...
Need help?
General
