EasyManuals Logo

Evolution EVOSAW 185 User Manual

Evolution EVOSAW 185
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
www.evolutionpowertools.com
Read Instructions
CE certication
CSA certication
Triman - Waste Collection
& Recycling
Warning
(1.10) INTENDED USE OF
THIS POWER TOOL
WARNING: This product is a Hand Operated
Chop Saw and has been designed to be used
with genuine Evolution blades. Only use
accessories designed for use in this machine
and/or those recommended specically by
Evolution Power Tools Ltd.
When tted with an appropriate blade
this machine can be used to cut:
Mild Steel
Aluminium
(1.11) PROHIBITED USE
OF THIS POWER TOOL
WARNING: This product is a Hand Operated
Chop Saw and must only be used as such.
It must not be modified in any way, or used
to power any other equipment or drive
any other accessories other than those
mentioned in this Instruction Manual.
(1.13) WARNING: This machine is not intended
for use by persons (including children)
with reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning the safe
use of the machine by a person responsible
for their safety and who is competent in its
safe use. Children should be supervised to
ensure that they do not have access to, and
are not allowed to play with, this machine.
(1.14) ELECTRICAL SAFETY
This machine is tted with the correct moulded
plug and mains lead for the designated market. If
the supply cord is damaged, it must be replaced
by a special cord or assembly available from the
manufacturer or its service agent.
(1.15) OUTDOOR USE
WARNING: For your protection, if this tool is
to be used outdoors it should not be exposed
to rain, or used in damp locations. Do not place
the tool on damp surfaces. Use a clean, dry
workbench if available. For added protection
use a residual current devise (R.C.D.) that will
interrupt the supply if the leakage current to
earth exceeds 30mA for 30ms. Always check the
operation of the residual current devise (R.C.D.)
before using the machine. If an extension cable
is required it must be a suitable type for use
outdoors and so labeled.
The manufacturer’s instructions should be
followed when using an extension cable.
(2.1) POWER TOOL GENERAL
SAFETY INSTRUCTIONS
(These General Power Tool Safety Instructions
are as specied in BS EN 60745-1:2009 & EN
61029-1:2009).
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/
or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
(2.2) 1) General Power Tool Safety Warnings
[Work area safety].
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Evolution EVOSAW 185 and is the answer not in the manual?

Evolution EVOSAW 185 Specifications

General IconGeneral
BrandEvolution
ModelEVOSAW 185
CategorySaw
LanguageEnglish

Related product manuals