IONPURE
®
G2 DISPLAY BOARD – IP-POWERDSP-G2
IP-POWERDSP-G2MAN Rev 1 Page 12 of 25
3 Operation
3.1 Control/Navigation Keys
Figure 7: Control/Navigation Keys
ESC: press to exit a submenu, deactivate the cursor or discard setpoint changes.
UP: press to see the previous page of information or select between submenus or
configurable setpoints. When adjusting a setpoint, press to increase the value. Hold to
increase the value at a higher speed.
DOWN: press to see the previous page of information or select between submenus or
configurable setpoints. When adjusting a setpoint, press to decrease the value. Hold to
decrease the value at a higher speed.
ENTER: press to activate the cursor to select submenus or configurable setpoints. Press
again to enter the selected submenu or to accept setpoint changes.
To Next Page
Loading...
