IONPURE
®
G2 DISPLAY BOARD – IP-POWERDSP-G2
IP-POWERDSP-G2MAN Rev 1 Page 25 of 25
APPENDIX – UL and CE Compliance
UL (US/CANADA)
The G2 display board was evaluated as an accessory of the G2 power controller. Both are recognized
by UL through compliance with the following standards:
• UL 61010-1 (Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use; Part 1: General Requirements)
• CAN/CSA-C22.2 No. 61010-1 (Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use; Part 1: General Requirements)
EUROPEAN UNION DIRECTIVE
The G2 display board was evaluated as an accessory of the G2 power controller. Both meet the
Electromagnetic Compatibility (EMC) Directive 2004/108/EC and the Low Voltage Directive (LVD)
2006/95/EC through compliance with the following standards:
• EN 61000-6-4 (Generic Standards – Emission Standard for Industrial Environments)
• EN 61000-6-2 (Generic Standards - Immunity for Industrial Environments)
• IEC 61010-1 (Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use – Part 1: General Requirements)
To Previous Page
Loading...
