Wipe Effect Type
Description Defines the direction of a wipe transition effect: from right to left or from left to
right.
Possible Values Vert. L>R, Vert. R>L
Default value Vert. L>R
Insert in Playlist
Description Specifies if the clips added to a playlist are inserted before or after the active
clip in the playlist.
Possible Values Before, After
Default value Before
Insert SLSMNative Speed
Description Defines whether an SLSM clip inserted into a playlist will automatically be set to
be played out at its native speed, or at the value defined in the Default Playlist
Speed parameter.
Possible Values • No (cleared) means that playout speed of the SLSM clips depends on the
value defined as the Default Playlist Speed.
• Yes (selected) means that the playout speed of the SLSM clips is
automatically set to its native speed.
Default value No (cleared)
Default Playlist Load Mode
Description Determine the way a playlist will be loaded.
Possible Values • Always: the playlist is always loaded in PGM+PRV.
• Conditional: the playlist is loaded in PGM+PRV, except in Multi-PGM mode
when a single PGM is controlled, then only the first playlist element is loaded
on the controlled channel.
It allows loading and playing multiple playlists using a single Remote Panel.
Default value Always
INSTALLATION AND CONFIGURATION MANUAL
LSM-VIA |6. Configuring LSM-VIA| 29
To Next Page
Loading...
Need help?
General