EasyManua.ls Logo

EWM microplasma 20 - Mains Connection; Mains Configuration

EWM microplasma 20
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Design and function
Transport and installation
099-007010-EW501
07.09.2016
23
4.1.6 Mains connection
DANGER
Hazards caused by improper mains connection!
An improper mains connection can cause injuries or damage property!
Only operate machine using a socket that has correctly fitted protective earth.
The mains voltage indicated on the rating plate must match the supply voltage.
If a new mains plug must be fitted, only an electrician may do so as per the relevant
national legislation or regulations.
Mains plug, socket and lead must be checked by an electrician on a regular basis.
When operating the generator, always ensure it is earthed as stipulated in the operating
instructions. The network created must be suitable for operating machines according to
protection class I.
4.1.6.1 Mains configuration
The machine may only be connected to a one-phase system with two conductors and an earthed
neutral conductor.
Figure 4-6
Legend
Item
Designation
Colour code
L
Outer conductor
brown
N
Neutral conductor
blue
PE
Protective conductor
green-yellow
Insert mains plug of the switched-off machine into the appropriate socket.

Table of Contents

Related product manuals