EWM Taurus 551 Basic FDG - Page 43

Design and function
Special parameters (advanced settings)
099-005149-EW501
11.08.2016
43
Enter
+
l
0
Exit
Figure 5-23
Display
Setting/selection
Ramp time for wire inching
0 = -------- normal inching (10s ramp time)
1 = -------- fast inching (3s ramp time) (Ex works)
Lat. and sp. lat. tapping start
0 = -------- no latched tapping start (Ex works)
1 = -------- latched tapping start possible
Support for wire feeders with voltage-sensing.
0 = ------- Function switched off
1 = ------- Function switched on (ex works)
Remote control encoding (Frc)
0-----------Automatic remote control detection (ex works)
2-----------Remote control encoding for accessory components with a single rotary knob
only
9-----------Remote control encoding for accessory components with a single pair of
buttons or a rocker only
1, 3–8 ----No remote control encoding
10–15 ----No remote control encoding