EWM Taurus 551 Basic FDG - Taurus 401 Basic FDW

Technical data
Taurus 401 Basic FDW
56
099-005149-EW501
11.08.2016
8.2 Taurus 401 Basic FDW
MMA
MIG/MAG
Setting range for welding current
5 A–400 A
Setting range for welding voltage
20.2 V–36.0 V
14.3 V–34.0 V
Duty cycle at 40 °C (100% DC)
400 A
Load cycle
10 min. (60% DC  6 min. welding, 4 min. pause)
Open circuit voltage
79 V
Open circuit voltage (VRD off)
22 V
Mains voltage (tolerances)
3 x 400 V (-25% to +20%)
Frequency
50/60 Hz
Mains fuse (safety fuse, slow-blow)
3 x 32 A
Mains connection lead
H07RN-F4G6
Max. connected load
18.5 kVA
17.5 kVA
Recommended generator rating
25 kVA
cos/efficiency
0.99/90%
Ambient temperature*
-25 °C to +40 °C
Machine cooling/torch cooling
Fan (AF)/water
Workpiece lead
70 mm²
Insulation class/protection classification
H/IP 23
EMC class
A
Safety identification
/ /
Other standards used
IEC 60974-1, -2, -10
AS 1674.2-2003 (VRD AUS)
Cooling capacity at 1 l/min.
1500 W
Max. flow rate
5 l/min.
Max. coolant outlet pressure
3.5 bar
Max. tank capacity
12 l
Dimensions L x W x H
1085 x 450 x 1003 mm
42.7 x 17.7 x 39.5 inch
Weight (
1
)
118 kg
260.1 lb
*Ambient temperature depends on coolant! Observe the coolant temperature range for the
welding torch cooling!