Excell 320S - Interface Settings: USB Logger and RTC; USB Logger Configuration; Real Time Clock (RTC) Settings

04012XXX
EXCELL PRECISION CO., LTD
ZSME400000011
59
Item
Function
Setting value
Default
Parameter
Description
Con
Modbus
connection
mode
0
Disable
0
1
Modbus over TCP/IP
2
Modbus RTU over TCP/IP
5-8 USB Logger
Item
Function
Setting value
Default
Parameter
Description
LOG
USB Logger
0
Disable
0
1
Record weight data every 1 sec
2
Record weight data every 2 sec
3
Record weight data every 3 sec
4
Record weight data every 5 sec
5
Record weight data every 10 sec
6
Log when batch is OK.
7
Log when press F key
8
Log after Hi, OK, Lo comparison
5-9 Real Time Clock
 Increment flashing digit
 Decrement flashing digit
 Move flashing point left
 Move flashing point right
 Store data in memory
 Exit / Escape
Press the key
Input desired parameter code
Press the key to confirm or press key to escape
To continue another function setting or press key to escape
Display shows the existing parameter code. Input new code
as required. Then press the key
Press the key