Excell 320S User Manual

04012XXX
EXCELL PRECISION CO., LTD
ZSME400000011
78
Appendix 6 Setup/Update 320S with Ethernet
A) Set up a network to configure 320S indicator
1. Connect 320S to a HUB via a RJ45 cable (CAT-5 / CAT-6).
2. Connect your PC/NB to the same HUB.
3. Default IP address of 320S is 192.168.1.210.
Follow below steps to setup PC/NB’s IP address :
a. On Windows 10, right click on Start icon to go to setting
b. Click on “Network Connections”
c. Click on “Change adapter options”
d. Right click on the Ethernet Adapter that you connected to the HUB, then click on
“Properties”.
e. Choose “TCP/IPv4” then click on “Properties”.

Excell 320S Specifications

General

Brand	Excell
Model	320S
Category	Measuring Instruments
Language	English