Introducing the EXFO EX10
EXFO EX10 5
Technical Specifications
RJ45 Port and LEDs
The RJ45 port is mainly used for testing the Ethernet network using an
electrical wired connection: 100Base-TX, 1000Base-T, and 2.5GE.
LEDs:
The LINK green LED is on when the link is up, off when the link is
down, and flashing when frames are transmitted and/or received.
The DUPLEX yellow LED is on for Full Duplex mode, off for Half Duplex
mode, and flashing when collisions are detected.
Technical Specifications
To obtain this product’s technical specifications, visit the EXFO Web site at
www.exfo.com.
To Next Page
Loading...
