Need help?Do you have a question about the EXFO MAX-890 and is the answer not in the manual?
General| Model | MAX-890 |
|---|---|
| Power Accuracy | ±0.5 dB |
| Type | Optical Spectrum Analyzer |
| Resolution Bandwidth (RBW) | 0.05 nm to 3 nm |
| Interface | USB |
| Power Supply | AC/DC adapter |
Provides specific safety guidelines related to laser transceivers and their operation.
Details important warnings and precautions for the safe installation and setup of the unit.
Instructions on how to power on the MAX-800 Series unit.
Guidance on launching and selecting the appropriate MaxTester application.
Overview of the main application window displayed upon starting MaxTester.
Allows OTN traffic generation and Bit Error Rate analysis.
Validates SONET/SDH transport protocol stability via BERT testing.
Validates DSn/PDH transport protocol stability via BERT testing.
Validates DSn/PDH embedded in SONET/SDH via BERT testing.
Allows DS1 testing in NI/CSU emulation mode.
Simulates network services and qualifies SLA parameters.
Performs Ethernet Throughput, Back-to-Back, Frame Loss, and Latency tests.
Allows Ethernet Layer 1-4 traffic generation for Bit Error Rate analysis.
Allows Ethernet traffic generation and analysis of up to 16 streams.
Allows configuring the physical port and signal interface structure.
Configuration settings for QSFP28 transceivers, including power class and control pins.
Configuration for PCS/Logical Lane mapping and skew adjustment.
Allows generation and monitoring of pointer events.
Measures Round Trip Delay for network paths.
Allows scanning and connecting to remote units for Ethernet tests.
Injects alarms/errors based on configured settings.
Provides capability to loop back Ethernet frames/packets.
Contains information about current test setup and results.
Allows saving, loading, importing, exporting, and deleting configuration files.
Allows starting/stopping tests and enabling traffic generation.
Steps to enable automatic power failure recovery and unit power-on features.
Lists common problems and their solutions before contacting technical support.
To Next Page
