Test Functions
316 MAX-800 Series
100 Advanced - Lanes Mapping & Skew
Default/Random/Manual Mapping
Allows changing the PCS/Logical lane mapping that will be used for the
test.
Default Mapping sets the TX mapping to the default numerical order
value which corresponds to the ascending PCS/Logical lane order.
Random Mapping sets the TX mapping in a random order. Each time
the button is tapped, random alignment markers are assigned to each
PCS/Logical lane.
Manual Mapping allows setting the TX mapping manually.
PCS/Logical Lane/Lane Marker and Assigned Status:
The PCS/Logical Lane/Lane Marker buttons allow assigning the
corresponding Lane Marker to the selected PCS/Logical or
CAUI/Physical Lane mapping (the one pointed by the arrow). The
Assigned Status column displays a check mark next to the
assigned PCS/Logical Lanes. Range is from 0 to 19 for OTU4/100G.
PCS/Logical Lane and CAUI/Physical Lane columns indicate the
target PCS/Logical to CAUI/Physical mapping.
Clear All clears the PCS/Logical to /Physical Lane assignments.
OK accepts the new PCS/Logical to /Physical lane mapping. All
target PCS/Logical Lane fields must contain an assignation,
including duplicates, to give access to the OK button.
Note: A PCS/Logical Lane marker can be assigned more than once. If this is the
case, a red background is used to highlight all occurrences of this
PCS/Logical Lane marker.
To Next Page
Loading...
