Test Setup - Test Configurator, Timer, and System
MaxTester 87
QSFP/SFP
QSFP/SFP
This tab gives hardware information related to the inserted transceiver
module.
From the Test menu, tap Setup, Test Configurator, tap on the interface
block and on the QSFP/SFP tab.
Parameters
The following parameters are retrieved from the transceiver:
Parameter QSFP28
SFP
SFP+
SFP28
Module ID XX
Vendor Name XX
Part Number XX
Serial Number XX
Hardware Revision XX
Revision Compliance X-
Connector Type XX
Speed XX
Type/Compliance Code XX
Wavelength -X
Mode XX
Power Class XX
Temperature (Actual/Max)
a
a. Displays respectively the current and the maximum temperature recorded.
XX
CLEI Code X-
To Next Page
Loading...
